Hydro-Logic 22070 BigBOY - 4.5" x 20" Big Blue Refillable Water Filter Cartridge - Catalytic Coconut Shell Carbon + KDF 85: Removes Iron, Sulfur/Rotten Egg Smell
Hydro-Logic Big Boy KDF85 Carbon Replacement Filter-The KDF85 Filter is ideal for well water users with iron and sulfur and city water users with chloramines.
- Combination of KDF 85 + Granular Activated CATALYTIC Coconut Shell Carbon
Removes Iron/Sulfur/Rotten Egg Smell
Filter Size is 4.5"x20". Fits standard Big Blue Housing
THIS FILTER CARTRIDGE WILL FIT BIG BLUE HOUSING 20"
SPECIAL MIX OF CATALYTIC CARBON AND KDF85 MEDIA
KDF 85 Medium Removes or reduces iron and hydrogen sulfide from municipal or other water supplies. Also controls scale, bacteria and algae.
iron / hydrogen sulfide reduction filter contains a combination of KDF85 media and coconut shell activated carbon. The KDF85 effectively reduces dissolved iron and hydrogen sulfide odor over a wider pH range than possible with standard oxidation filters such as manganese greensand, thereby protecting your plumbing system including toilets, bath tubs and showers, and appliances such as clothes washers and dishwashers, from unsightly staining and odor. The activated carbon removes organic contaminants to substantially improving water clarity, taste, and odor. It does NOT add any harmful chemicals to the water, making it completely safe for drinking water applications.
fraction of the cost of competitive iron removal systems
easy to replace cartridge - no media regeneration necessary!
NO backwashing required!
effective over a wide pH range of 6.5 to 8.5
also removes iron and hydrogen sulfide (rotten egg smell)
does not add harmful bi-products to your drinking water
prevents staining of laundry and plumbing system including you shower and tub
filter media inhibits bacteria growth (bacteriostatic)
Application: This system should be employed where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known or expected (hydrogen sulfide produces a distinct rotten egg / sulfur odor). This filter is most effective where iron and hydrogen sulfide levels are less than 5 ppm. Best contaminant removal rates are achieved where the pH is between 6.5 and 8.5 and where the water contains some dissolved oxygen. This filter will also remove ferric iron through mechanical filtration, although a sediment filter may be a more cost effective choice. If your water's pH level is 7.0 or higher, you should consider our PH5 iron / hydrogen sulfide reduction filter which uses a different filter media - the replacement cartridges are significantly cheaper.
The life of the filter cartridge depends on the contamination level (iron, manganese and hydrogen sulfide levels) and amount of water consumed on a daily basis. The expected filter life for a typical residential application is about 20,000 gallons (75,500 L). For best results and longest filter-life, a sediment pre-filter is recommended.
What types of contaminants are you dealing with?
Problem - Likely Cause
rusty red or brown staining of fixtures or laundry and/or your water has a metallic taste - excess iron
black staining of fixtures or laundry - excess manganese
rotten egg smell from water - Hydrogen sulfide (H2S)
How it Works: KDF85 media acts as a catalyst to change soluble iron (ferrous) cations into insoluble ferric hydroxide which becomes trapped in the filter. The hydrogen sulfide is converted into an insoluble sulfide precipitate which is then similarly trapped and filtered. Ferric iron is removed by mechnical filtration.
Specifications & Operating Conditions:
Housing Material Polypropylene
Maximum Recommended Flow Rate 3 Gallons Per Minute (11 LPM)
Recommended Operating Temp. Range: 40-100°F (4.4 to 37°C)
Maximum Recommended Pressure 90 PSI (6.2 bar)
Required pH level: 6.5 to 8.5
Recommended Dissolved Oxygen : Iron level in ppm x 0.6
Maximum Recommended Iron Level: 5 ppm (mg/l)
|Model Number||Hydro-Logic 22070|
|Brand||Oceanic Water Systems|