Oceanic Commercial Reverse Osmosis Water Filtration System | 600 GPD RO with Booster Pump
Special Price $974.99 Regular Price $1,009.99
FREE SHIPPING TO CONTINENTAL US
- Great for light commercial use in restaurants, labs, salons, etc. Reverse Osmosis Water Filtration System with up to 600 GPD and Booster Pump
- Assembled in the USA with NSF components: Membrane Housing, Cartridges, Fittings & Tubing.
- Built in booster pump increases the production of purified water by raising the water pressure to the optimal level for the reverse osmosis process
- Super-efficient High Capacity RO membranes combine to provide up to 600 gallons of reverse osmosis water daily. (Production based on lab conditions)
This System does NOT include a Water Storage Tank
OCEANIC REVERSE OSMOSIS - 600 GPD WITH BOOSTER PUMP
Our 600 water filtration system combines two high efficiency 300gpd reverse osmosis membranes that produce up to 600 gallons of filtered water per day, making it a great choice for commercial applications. This unique combination of quality reverse osmosis membranes results in top-of-the-line performance rates for removing chlorine, hardness, heavy metals, toxins, and a long list of other water impurities.
The system also features a built in booster pump. A booster pump takes the incoming water pressure and brings it up to the optimal level for the reverse osmosis process. This not only increases the system's production rate, but it also maximizes the efficiency in terms of drain to pure water ratio. By monitoring a drop in pressure on the gauge, you can determine when the system's pre filters are due for a change.
Compared to the industry standard 10" filters, the 20" oversized pre filters have the capacity to trap twice as many contaminants. This allows the system to be used heavily in commercial environments without needing to change the filters as frequently. Restaurants, salons, labs, and offices all benefit in their own ways from high quality RO water, and this system gets the job done.
All flow rates stated on our reverse osmosis systems and membranes are assuming a water temperature of 77°F. Water temperature changes will affect the flow rate. For every degree F the temperature lowers, about 3% of product flow is lost. For every degree F the temperature increases, about 3% product flow rate is gained. This occurs because water with a higher temperature has a lower viscosity and higher diffusion rate, which makes it easier for the water to permeate the RO membrane. Lower feed water temperatures during the winter season will result in a decrease in flow rate
This Unit Includes the Following:
1st Stage Sediment Filter 2.5 x 20
2nd Stage GAC cartridge 2.5 x 20
3rd Stage Carbon Block 2.5 x 20"
4th Stage Low Pressure membranes up to 600 GPD
5th Stage Post carbon filter.
Drain control valve.
|Brand||Oceanic Water Systems|
Write Your Own Review